Texas · Updated July 2026

Plumber cost in Texas

2026 hourly rates, repair price ranges, licensing requirements and permit rules for Texas homeowners. Rates run about 4% below the national average.

$70–$145/hr standard$110–$215/hr emergencySouth region2026 data
Estimate my repair cost → 📞 877-552-8556
HomeAll states › Texas
Standard rate
$70–$145
per hour, business hours
Emergency rate
$110–$215
per hour, after hours
Trip fee
$70–$190
service call charge
Typical emergency call
$385–$770
all-in, after hours
Rates

What plumbers charge in Texas

Plumbing labor in Texas runs $70 to $145 per hour during normal business hours, about 4% below the national average. That figure reflects local wage levels, licensing requirements, permit and inspection costs, and how competitive the contractor market is in metros like Houston and San Antonio.

After-hours, weekend, and holiday work carries the standard industry premium — roughly 1.5 times the base rate for evenings and weekends and 2 times for holidays — putting emergency labor in Texas at $110 to $215 per hour. Add a trip fee of $70 to $190, and a typical after-hours call including diagnosis and a routine repair lands between $385 and $770.

Plumbing repair costs in Texas — 2026
RepairLowHighAverage
Burst or leaking pipe$480$4,800$1,152
Frozen pipe repair$192$1,440$576
Blocked or clogged drain$144$480$269
Overflowing toilet$144$384$240
Water heater replacement$1,152$3,360$1,824
Water heater repair$144$672$365
Gas leak detection & repair$288$960$576
Sewer line backup / clearing$336$864$528
Sewer line replacement$2,880$11,520$6,240
Slab leak detection & repair$1,440$5,760$2,880
Whole-house repipe$3,840$14,400$8,160
Sump pump replacement$384$1,344$768
Running toilet repair$125$298$192
Leaky faucet repair$120$336$192
Toilet replacement$336$864$528
Low water pressure diagnosis$144$384$250
Local conditions

What drives plumbing costs in Texas

Texas plumbing costs are shaped above all by expansive clay soil and slab-on-grade construction. Foundation movement across the DFW, Houston, and Austin markets breaks under-slab supply and drain lines at a high rate, making slab leak detection and repair one of the largest residential plumbing expenses in the state. Because tunneling or breaking through slab is costly, whole-house repipes routed through the attic are frequently recommended over repeated spot repairs. Hard water across Central and North Texas shortens water heater life, and hard freeze events like February 2021 demonstrate that Texas housing is poorly insulated against burst pipe risk.

Licensing

Plumber licensing in Texas

Authority: Texas State Board of Plumbing Examiners (TSBPE)

Texas licenses Apprentice, Tradesman, Journeyman, and Master Plumbers through the Texas State Board of Plumbing Examiners. A Master Plumber license is required to operate a plumbing company and pull permits, and Texas also issues separate Medical Gas and Water Supply Protection endorsements.

Verifying a license takes a few minutes and is the cheapest protection available to you. Confirm the license number directly with the issuing authority rather than trusting a badge on a website, and ask for current certificates of liability insurance and workers compensation. If a contractor is reluctant to provide either, that is your answer.

Permits

Permit requirements in Texas

Permits are issued by municipal building departments. Water heater replacement, repipe, sewer replacement, and gas line work require permit and inspection in essentially all Texas cities. Permit costs vary widely between jurisdictions.

Homeowners sometimes see the permit as an avoidable cost, but it works in your favor. Unpermitted plumbing work can complicate an insurance claim after a failure, and it reliably surfaces during a home sale inspection, where it becomes a negotiating point against you. The inspection itself also catches slope, venting, and connection errors that would otherwise show up years later as chronic problems.

Coverage

Texas metro areas

Cost data on this page reflects statewide averages across Texas, including Houston · San Antonio · Dallas · Austin · Fort Worth · El Paso · Arlington · Plano · Frisco · McKinney. Rates within a state vary — major metros typically run 10 to 20 percent above rural areas for the same work, driven by wage levels and demand, while rural areas often carry higher trip charges because of travel distance.

FAQ

Plumbing costs in Texas — common questions

How much does a plumber cost per hour in Texas?

Licensed plumbers in Texas typically charge $70 to $145 per hour during normal business hours, which is about 4% below the national average. After-hours, weekend, and holiday calls run $110 to $215 per hour. Most companies also charge a service call or trip fee of $70 to $190, which is sometimes credited toward the repair if you approve the work.

What does an emergency plumber cost in Texas?

A typical after-hours emergency call in Texas runs $385 to $770 including diagnosis, trip fee, and a standard repair. Holiday calls can reach double the standard rate. Major work such as a burst pipe requiring pipe replacement, or a failed water heater, runs well above that range. Use the emergency plumber calculator to break the cost down by fee type for your specific situation.

Do plumbers have to be licensed in Texas?

Texas licenses Apprentice, Tradesman, Journeyman, and Master Plumbers through the Texas State Board of Plumbing Examiners. A Master Plumber license is required to operate a plumbing company and pull permits, and Texas also issues separate Medical Gas and Water Supply Protection endorsements. Always verify a license number directly with the issuing authority before hiring, and confirm the contractor carries current liability insurance and workers compensation.

Do I need a permit for plumbing work in Texas?

Permits are issued by municipal building departments. Water heater replacement, repipe, sewer replacement, and gas line work require permit and inspection in essentially all Texas cities. Permit costs vary widely between jurisdictions. Permits matter beyond compliance: unpermitted work can complicate a homeowners insurance claim and routinely surfaces during a home sale inspection. A licensed plumber pulls the permit as a matter of course and includes the cost in the quote.

What plumbing problems are most common in Texas?

Texas plumbing costs are shaped above all by expansive clay soil and slab-on-grade construction. Foundation movement across the DFW, Houston, and Austin markets breaks under-slab supply and drain lines at a high rate, making slab leak detection and repair one of the largest residential plumbing expenses in the state. Because tunneling or breaking through slab is costly, whole-house repipes routed through the attic are frequently recommended over repeated spot repairs. Hard water across Central and North Texas shortens water heater life, and hard freeze events like February 2021 demonstrate that Texas housing is poorly insulated against burst pipe risk.

How do I find a reliable plumber in Texas?

Verify the license with the state or local authority rather than taking a website badge at face value. Ask for proof of liability insurance. Get at least two written quotes on any non-emergency job, since pricing between contractors in Houston and across Texas varies more than most homeowners expect. Ask whether the trip fee is credited toward the repair, and request flat-rate pricing rather than open-ended hourly billing so the number you approve is the number you pay.

Need a plumber in Texas now?

Licensed plumbers available 24 hours a day, including weekends and holidays. Water damage compounds every minute.

📞 Call 877-552-8556 now
📞 Call 877-552-8556 — 24/7